MIL­LIONS OF SAT­IS­FIED CUS­TOM­ERSMADE IN GER­MANYSINCE 1896
Heat-Resistant Paint Spray Black Matte 400 ml
Heat-Resistant Paint Spray Black Matte 400 ml
Heat-Resistant Paint Spray Black Matte 400 ml
Heat-Resistant Paint Spray Black Matte 400 ml

NIGRIN CORE

Heat-Resistant Paint Spray Black Matte 400 ml

Item no. 74117

  • Permanently protects all engine & exhaust parts that get hot

  • Excellent adhesion, fast-drying & weatherproof

Siegel

The pro­duct in de­tail


NIGRIN Heat-Resistant Paint Spray is a silicone-based specialty coating for the permanent coating of heavily heat-exposed components. It reliably protects engine and exhaust parts, stove pipes, or grill components against corrosion, stone chips, and weathering — even under extreme temperature loads up to 600 °C.

The high-quality formulation offers excellent adhesion properties and provides a uniform, deep-black finish. Ideal for automotive applications as well as heat-exposed metal surfaces in the home and garden.

Product benefits:

  • Heat-resistant up to 600 °C – for engines, exhaust systems, stove pipes & grills
  • Protects against corrosion, stone chips, and weathering
  • Silicone-based formula with excellent adhesion
  • Uniform, deep-black matte finish
  • Suitable for indoor and outdoor applications

NIGRIN Heat-Resistant Paint Spray is a blackening protective coating based on silicone. It permanently protects all engine and exhaust parts that get hot against corrosion and stone chips, and can also be used, for example, to protect stove pipes and grills. It is heat-resistant up to 600 °C.



Application steps

01

Prepa­re the sur­face

Make sure the surface is free of rust and grease, clean, and dry. Lightly sand smooth surfaces and mask off any areas not to be sprayed.

02

Prepa­re the can

Shake the can at room temperature for at least 2 minutes, then do a test spray.

03

Ap­p­ly the base coat

Apply a thin base coat at a spraying distance of approx. 10–15 cm and allow to flash off for 5 minutes.

04

Ap­p­ly the top­coat

Shake the can before applying the topcoat and apply a full covering layer.

05

Dry­ing and cu­ring

After 10 minutes the spray is dust-dry, after 1 hour tack-free. For full curing, slowly heat the part to above 250 °C.

Note

Heat up slowly! Full curing only occurs through heat exposure above 250 °C.

Matching products

Products that make your driving experience even better.